Downvote-a-bots are not capable of actual thinking.
What you sometimes need is a USB stick having a native "geometry" in terms of HDD emulation ability, that will be recognized properly by the particular series of chipset on the target mainboard.
Then the data bits written to a fully-zeroed drive must conform to what is expected of a bootable device on the target mainboard, for one thing the partition(s) often needs to be well-aligned with the underlying storage hardware to a more particular degree than merely when it is a "perfectly" readable & writeable drive.
Many new USB sticks fail at this fundamental point because the factory partitioning & formatting was accomplished using an image not exactly appropriate after the vendors of the silicon storage or controller chips make hardware revisions.
Analogously, also why writing an IMG or dd from a not-very-identical stick, or with dissimilar partitioning and/or formatting is quite hit or miss.
Sometimes freshly reformatting is enough for problem sticks, other times they can not be made to boot without repartitioning. Either way a fresh reformat or repartition may simply overwrite using (proven nonoptimal) disk structures still remaining in place unless the device is zeroed beforehand. Sometimes a reboot is needed for an OS to forget the structure that was recognized during most recent insertion.
I like Ventoy (and Rufus) but for best results I start with a proven bootable stick which I prepare manually from a zeroed stick and verify bootability beforehand. Similar preparation when getting ready to manually write reliable plain Windows Setup USBs from the mounted ISO.
What you sometimes need is a USB stick having a native "geometry" in terms of HDD emulation ability, that will be recognized properly by the particular series of chipset on the target mainboard.
Then the data bits written to a fully-zeroed drive must conform to what is expected of a bootable device on the target mainboard, for one thing the partition(s) often needs to be well-aligned with the underlying storage hardware to a more particular degree than merely when it is a "perfectly" readable & writeable drive.
Many new USB sticks fail at this fundamental point because the factory partitioning & formatting was accomplished using an image not exactly appropriate after the vendors of the silicon storage or controller chips make hardware revisions.
Analogously, also why writing an IMG or dd from a not-very-identical stick, or with dissimilar partitioning and/or formatting is quite hit or miss.
Sometimes freshly reformatting is enough for problem sticks, other times they can not be made to boot without repartitioning. Either way a fresh reformat or repartition may simply overwrite using (proven nonoptimal) disk structures still remaining in place unless the device is zeroed beforehand. Sometimes a reboot is needed for an OS to forget the structure that was recognized during most recent insertion.
I like Ventoy (and Rufus) but for best results I start with a proven bootable stick which I prepare manually from a zeroed stick and verify bootability beforehand. Similar preparation when getting ready to manually write reliable plain Windows Setup USBs from the mounted ISO.